What if there is no electricity in field construction? 48V industrial inverter helps you solve difficult problems.

Everyone who does engineering knows that the biggest headache is not the hard work, but the discovery at the scene-there is no electricity. The 

temporary electricity at the construction site has not been pulled over, the base station in the mountainous area needs to be maintained, the outdoor 

monitoring needs to be debugged, and the power tools, laptops and communication equipment with you are all waiting for power supply. At this time, 

you need a reliable industrial inverter to convert 48V DC into 220V AC, so that all equipment can run normally.

Why choose 48V inverter?

48V is the most common DC voltage level in industrial scenes. The storage battery of communication base station is 48V, the standby power supply of 

industrial cabinet is 48V, and many outdoor mobile power supplies are also 48V output. With a 48V inverter, the ready-made 48V battery pack can be 

directly connected, and it can be used without extra battery replacement, which is why the 48V industrial inverter is so popular in the engineering circle.

Choose different inverters for different scenes.

Power supply for small equipment: rack pure sine wave inverter

If you only supply power to low-power devices such as notebooks, switches and surveillance cameras, it is enough to choose a rack inverter. 19-inch 

standard rack installation, directly stuffed into the equipment cabinet, does not occupy space. The output waveform of pure sine wave inverter is as 

clean as that of commercial power, and the use of precision electronic equipment does not hurt the machine.

Baoweite's series of rack inverters range from 1kVA to 10kVA, with 48V DC input converted to 220V AC output. It comes standard with overload pro-

tection, short circuit protection and overheating protection, and it also has an LCD display to see the voltage and current in real time.

High-power equipment: three-phase industrial inverter

If you want to bring high-power inductive loads such as water pump, motor and air compressor, the single-phase inverter may not be able to carry it, 

so you have to get a three-phase inverter. Three-phase 380V output, directly driven by power equipment, and stable starting impact.

The power of three-phase industrial inverter covers 10kVA to hundreds of kVA, which supports the expansion of multiple parallel machines and is suitable 

for large-scale outdoor construction, emergency power supply and energy storage power stations. It is very flexible to combine several sets as much 

power as you need.

Off-grid scenario: Off-grid inverter+solar panel

In remote areas without power grid, such as mountain base stations, forest farm monitoring and island posts, off-grid inverters will be used at this time. 

With solar panels and storage batteries, an independent off-grid power supply system is formed, which does not depend on commercial power at all.

Off-grid inverter supports photovoltaic access and battery management. During the day, solar panels are charged, and at night, the battery is discharged 

for inverter power supply, and it is self-sufficient for 7×24 hours.

Choose an inverter and look for these points.

Many people only look at the power when buying inverters. In fact, these parameters are more important:

Pure sine wave output: square wave and sine wave inverter are cheap, but they will interfere with precision equipment and even burn out the motor. 

Be sure to choose a pure sine wave inverter.

Conversion efficiency: The higher the efficiency, the more power is saved. The efficiency of a good industrial inverter can be above 90%, and the power 

supply time is longer under the same battery capacity.

Protection functions: input reverse connection protection, output short circuit protection, overload protection, overheating protection-all these are standard, 

and none of them will do.

Redundancy parallel connection: N+1 redundancy must be supported in important scenes. If one machine breaks down on top of the other, the supply will 

not be cut off.

Baoweite industrial inverter series

Baoweite has been focusing on R&D and production of industrial inverters for many years, and its product line covers:

Single-phase inverter: 1kVA~10kVA, 24V/48V/110V/220V DC input optional.

Rack: 1U/2U/3U standard rack installation.

Each equipment has undergone full-load aging test, leaving the factory with a complete test report, shipped nationwide, and supports customized solutions. 

Whether you are outdoor construction, base station maintenance or energy storage power station, there is always an industrial inverter for you.

Need a selection quotation? Tell me your power demand, DC voltage and installation method, and I will match the most suitable model for you in one minute.

If you need type selection and transformation, you can consult Baoweite for the scheme. Thank you for browsing. You can collect official website of 

Shenzhen Baoweite Power Supply Co., Ltd.